Privacy

Flipcorder has no account, no advertising and no server of ours. Your videos stay on your iPhone, and in its backup if you use one, unless you save or share them yourself. The app sends only two things, and you can turn both off: a report if it crashes or freezes, and usage stats. Each comes with a random number made by this copy of the app, never who you are, and neither ever includes your videos. Anything else, like an email to us, leaves only if you send it yourself.

Your videos

Everything you film is stored inside the app on your iPhone. It isn’t uploaded anywhere, and it doesn’t sync to your other devices. Your tapes are included in the backup of your iPhone, like other apps’ data, so they come back if you restore it.

Camera, microphone and Photos

Flipcorder asks for the camera and microphone so it can record, and lets go of them when it’s switched off. It asks to add to your Photos library only when you save a tape there, or turn on “Copy new flips to Photos” in its settings. It never reads your library.

Where a tape was filmed

Photos can show where a saved tape was filmed, if you turn it on: the camcorder’s settings have “Remember where flips were filmed”, and it’s off until you switch it on. Only then does Flipcorder ask to use your location, and only while you’re using the app. It never asks when it opens or during the tour.

While it’s on and you’ve allowed it, each flip keeps one rough place, rounded to about 110 meters: enough for the park or the beach, not your front door. It’s kept in a small file beside the flip on your iPhone. Flips filmed while it was off never get one. If you don’t allow location, nothing is kept and saves go ahead without a place; you can allow it later in the Settings app, or switch it off.

When you save a tape to Photos, Photos keeps the place of the tape’s first flip with the video, so it shows on the map in Photos. With “Copy new flips to Photos” on, each copied flip gets its own. The movie file itself never carries a place, and neither does anything you share from the app. Flipcorder never sends where you filmed anywhere, and it’s never part of the usage stats. Location isn’t on the App Store’s privacy label, because Flipcorder never collects it: the place goes only from your iPhone into your own Photos library.

Switch it off and the app forgets every place it kept. Videos already in Photos keep theirs, and Photos can remove it. If you share a video from Photos, Photos’ own share options decide whether its location goes along.

Reminders

Reminders are off until you turn them on in the camcorder’s settings. If you do, Flipcorder asks to send you notifications, and only then. It schedules them on your iPhone itself, as ordinary local notifications, for example a quiet morning nudge or an afternoon check-in if you haven’t filmed, and an evening note when today’s tape is ready to play. There’s no push server and no network call, so nothing about you or your tapes is sent anywhere, and turning reminders off removes every one still waiting.

Widgets

The Home Screen and Lock Screen widgets show today’s tape. They don’t read your tapes: the app keeps a small copy of what they show (today’s flip count and length, small pictures of today’s flips, and for the Streak, This week and Next sticker widgets, your streak, your week and your stickers) in a folder on your iPhone that only the app and its own widget can open. There’s no network and no account involved, and nothing about you or your tapes is sent anywhere. If you switch off “Show flips in widgets” in the camcorder’s settings, the widgets show the cassette and the count and never a picture, and the app removes the pictures it made.

Crashes and freezes

If the app crashes, or freezes for more than a couple of seconds, it sends a report to Sentry, the service we use to find and fix them. A report says what went wrong and where in the app’s code, on which iPhone model and iOS version, which version of Flipcorder (and whether it came from TestFlight or the App Store), and technical details like the phone’s language, memory and screen size. Each time you use the app it also tells Sentry that a session started and whether it ended in a crash, so we can see how many uses of each version end without one.

Reports come with a random number made for this copy of the app, the same one the usage stats below use. It isn’t your name, your email, your Apple Account or your iPhone’s own identifier, and it belongs to Flipcorder alone, so it can’t connect Flipcorder with another app. Delete the app and the number goes with it; reinstall and the app makes a new one. Sessions also carry a second random number that Sentry’s own code makes the same way, and deleting the app deletes that one too.

Reports never include your videos, sound, photos or file names, your name, an account, a screenshot or what was on your screen. Like any internet request, they reach Sentry with your IP address, and Sentry is set not to store it. None of this is used to track you or for ads. In the App Store’s privacy label this is “Crash Data”, “Performance Data” and “Other Diagnostic Data”, used to keep the app working, and “Device ID” for the random number. Because the same number comes with each report, the label lists them as linked to you: linked to that number, never to who you are.

If you’ve chosen to share analytics with Apple, Apple may also share crash reports with us, under Apple’s privacy policy.

Usage stats

The app sends usage stats to HeyCatch, so we can see which parts of Flipcorder people use and what to make better. They say when the app is opened, which of its main screens are opened, and when a flip is recorded (and whether closing or leaving the app cut it short), a tape is saved or shared (and whether it was saved first), or the tour is finished or skipped. They also say when the app asks for Apple’s rating prompt, and whether that comes after a save, a share or a tape played to its end. iOS decides whether the prompt really shows, and nothing about your rating, or whether you rated, comes back to the app.

They say when the camera can’t give a picture, and only why: you haven’t allowed camera access, Screen Time or whoever manages the iPhone keeps the camera off, or the camera stopped answering or sent no picture. When the tour ends, they say whether you went on to play your tape, went back to filming or skipped it, and, if a note then points at SAVE, whether you saved or shared next. When you tap one of the app’s feedback links (rate it, email us, the help page, or “Tell me about it” on a message about a problem), they say which one, and for a problem which kind it was, such as a tape that couldn’t be saved. They never say what you wrote, or whether you sent an email or left a rating.

They also say a few things about how you use the app: which version you started with and the week you started (or, if you had the app before, that you did, with the version and week you first opened it after updating), which look your latest flip used, whether flips stop at 20 seconds, which reminders are on, whether sounds are on and whether your flips show in widgets, whether it’s an iPhone Duo, the app’s language, and rough counts (none, one, 2 to 6, 7 to 29, or 30 or more) of the days you’ve filmed, the times you’ve saved a tape to Photos, and the days in your longest streak. These are kept with that random number and updated each time the app opens. The version and week you started are remembered on your phone even while usage stats are off, and sent only if you turn them on. Each event comes with the random number made for this copy of the app (the same one crash reports use), the app and iOS versions, the phone model, screen size, language, time zone, whether it’s on Wi-Fi or cellular, and on iPhone Duo whether it’s closed, part open or fully open.

They never include your videos, sound, pictures, file names, tape labels, your nickname, anything you type, or who you are. There’s no account: the random number, and a second one HeyCatch’s own code made for this copy of the app, are all that tie them together. So, as with crash reports, the label lists them as linked to you: to those numbers, never to who you are. Like any internet request, they reach HeyCatch with your IP address; the app asks HeyCatch not to use it to work out where you are. When it starts, the app also asks HeyCatch for its settings, and once for which features are on, with both random numbers. Deleting the app deletes both. None of this is used to track you or for ads. HeyCatch handles them for us in the United States, and stores them with PostHog, also in the United States. In the App Store’s privacy label this is “Product Interaction”, used for analytics, and “Device ID”, the random number, used for analytics too.

Turning it off

Crash reports and usage stats are on unless you turn them off: in the camcorder’s settings, under About, switch off “Share crash reports and usage stats”. From that moment nothing more goes to Sentry or HeyCatch; a few usage stats already waiting to go may still be sent. If you had switched off “Share usage stats” before, it stays off, and now covers crash reports too.

Emailing us

When you choose to email us from the app, it opens a new message to us in your own email app. Under the space for your words, it adds which version of Flipcorder you have, the iOS version and the iPhone model, so we don’t need to ask. If you tap “Tell me about it” on a message about a problem, the subject says what went wrong, and when the Mail app is set up it also attaches a small diagnostics file. An email from the camcorder’s settings has no file.

The diagnostics file is a list of what the camera and recorder did and when, with the iPhone model and iOS version. It holds no video, sound, pictures or places, and nothing you typed. You see the whole email before you send it, and you can change it or take the file off. Nothing goes unless you send it, and then it’s an ordinary email to help@flipcorder.app. You can also share the same file yourself: in the camcorder’s settings, under About, tap “Share diagnostics”.

This website

This website counts visits with Plausible Analytics, so we can see how many people visit, which pages they read and where they came from. Along with the page and the site that linked here, it counts your browser, operating system, device type, and the country, region and city your IP address points to. It sets no cookies and stores nothing on your device. It doesn’t keep your IP address, doesn’t use any of this to identify you, and doesn’t follow you to other sites.

It also uses HeyCatch, which shows us how visitors move around the site: the pages you open, what you click and how you arrived here, with your browser, device type and IP address. Unlike Plausible, HeyCatch stores a random ID on this site, in a cookie that lasts a year and in your browser’s storage until you clear it, so it can tell a returning visit from a new one. The ID isn’t your name or email, and the cookie belongs to this site alone. HeyCatch handles this for us in the United States, and stores it with PostHog, also in the United States. Clearing this site’s cookies and data removes the ID. If you have questions about it, ask us.

Both are for this website only, separate from the app’s own usage stats above.

The App Store links here may carry a campaign name, such as “site-hero” for the button at the top of the homepage. If the link that brought you here named a campaign, your browser puts that name in instead, from the page’s address. When someone who shares analytics with app developers downloads Flipcorder, Apple tells us how many came from each campaign, as totals, never who. Nothing is stored and nothing extra is sent.

The press page has a demo video. It shows a still of our own until you press play; only then does your browser load YouTube’s player (youtube-nocookie.com), so YouTube sees your IP address and the page you came from, under Google’s privacy policy. If you never press play, nothing loads from YouTube.

Contact

Questions about this policy go to help@flipcorder.app, the same address as Support.

Last updated 11 November 2026. What changed: the app now also says when it freezes and when a session starts and whether it ends in a crash (see Crashes and freezes); crash reports and usage stats share one random number made for this copy of the app, which reinstalling replaces; Sentry doesn’t store your IP address; and one switch, “Share crash reports and usage stats”, turns both off (see Turning it off). On 9 November: Usage stats now say when the camera can’t give a picture, how the tour ends, and which feedback link you tapped, a flip or share now notes whether it was cut short or saved first, and a new section, Emailing us, says what an email from the app includes. On 5 November: the page describes the app as it is, without naming versions; what it collects is unchanged. On 4 November: Usage stats now include a few things about how you use the app, such as which look your latest flip used and rough counts of the days you’ve filmed. On 27 October: you can choose to let Photos show where a saved tape was filmed (see Where a tape was filmed), and Usage stats now include when the app asks for Apple’s rating prompt. On 26 October: the app sends anonymous usage stats you can turn off (see Usage stats), and the widgets keep a copy of your streak, week and stickers.